Thorens TD 1600 Noyer Inclus Tas 1600
The Thorens TD 1600 Walnut Including TAS 1600 is a Belt Drive Vinyl Turntable + Cartridge - Walnut finish.
Return of the Thorens DNA
The Thorens TD 1600 turntable combines the brand's tradition of the past with the technology of the 21st century. Although it looks like the old and famous 160 series on the outside, with its classic wooden plinth, two-piece platter with thick rubber matting and acrylic dust cover, it incorporates many innovations on the inside.
The Thorens TP 92 tone arm: unrivalled stability
The Thorens TD 1600 is equipped with a 9" (232.8 mm) Thorens TP 92 tone arm. The horizontal bearing of the TP 92 arm is a high precision ball bearing located under the tone arm tube at the same level as the diamond for better stability. The counterweight, decoupled by two rubber rings, is also at the same level. The Thorens TP 92 tone arm tube is made of high quality cold forged aluminium. During the design of the arm, a laser vibrometer was used to analyse the resonances of the tube, allowing Thorens engineers to target specific frequencies and thus ensure almost no unwanted vibrations.
Elegance and performance combined
The Thorens TD 1600 has been specifically designed to ensure that your favourite vinyl records are reproduced faithfully and accurately. With virtually no background noise and a stable, even platter rotation, it allows you to rediscover all the details and sound dynamics that characterise vinyl. With its exceptional sound quality, the Thorens TD 1600 will fit perfectly into audiophile systems and provide hours of quality listening.
- Manual turntable with suspended subframe
- Belt drive
- Die-cast aluminium platter
- Turntable dimensions and weight: 30.5 cm (12") / 4.2 kg
- Speed: 33 1/3, 45 rpm
- Adjustable belt
- Electronically controlled synchronous AC motor
- Speed control: manual (switch on front)
- Colour: Walnut
Pick-up arm
- Arm type: Thorens TP 92
- Arm length: 232.8 mm
- Overhang: 17.8 mm
- Elbow angle: 23.6
- Effective weight (11 g)
- Magnetic anti-skating
TAS 1600 sensor
- Moving coil sensor
- Diamond Line Bare Contact
- 1/2" mounting format
- Frequency response: 20 - 50,000 Hz
- PCOCC coil (Ohno Continuous Cast Copper)
- Aluminium body
- Brass connection pins
- Channel separation: 28 dB (1 kHz)
- Output channel balance: 0.5 dB (1 kHz)
- Output voltage: 0.4 mV (1 kHz, 5 cm/sec)
- Vertical tracking angle: 20 degrees
- Recommended contact force: 1.8 to 2.2 g (standard 2.0 g)
- Diamond size: 1.5 x 0.28 mil
- 0.28 mm boron cantilever
- Coil Impedance: 12 Ohms (1 kHz)
- Coil inductance: 25 ?H (1 kHz)
- DC resistance: 12 Ohms
- Static compliance: 22 x 10 - 6 cm / dyne
- Dynamic compliance: 18 x 10 - 6 cm / dyne (100 Hz)
- Recommended load impedance: min 100 Ohms
- Cell weight: 8.2 g
Connections
- 1 stereo RCA
- XLR balanced output
- 1 ground socket
- Supplied accessories
- 1 power cable
- 1 rubber mat
- 1 mains transformer
- 1 acrylic protective cover
This turntable is supplied with the TAS 1600 cartridge. A cartridge designed to offer optimum performance in combination with a Thorens TD 1600 or Thorens 1601 turntable.
Logistic data
- Dimensions (WxHxD) : 454 x 180 x 369 mm
- Weight : 10.9 kg
Ref. Euroguitar : 107023
