Thorens TD 1600 Noir Inclus TAs 1600

4151.00 €

agotado - contáctenos
Tienda Euroguitar en Lille : agotado

Su tienda

36 rue Littré, Lille
del Lunes al sábado
10h-12h30 & 14h-19h


Teléfono : 03 20 88 85 85

Cerrar

Alerta disponibilidad

Pour recevoir un mail dès que ce produit sera disponible,
veuillez saisir votre adresse mail ci-dessous.

NO DISPONIBLE EN ESTE MOMENTO - preguntarnos

Garantía 3 años (CG)

30 días para cambiar de opinion (CG)

Garantía de mejor precio

SOBRE EL PRODUCTO

The Thorens TD 1600 Black Including TAS 1600 is a Belt Drive Vinyl Turntable + Cartridge.

Return of the Thorens DNA
The Thorens TD 1600 turntable combines the brand's tradition of the past with the technology of the 21st century. Although it looks like the old and famous 160 series on the outside, with its classic wooden plinth, two-piece platter with thick rubber mat and acrylic dust cover, it incorporates many innovations on the inside.

Stabilised subframe with new suspension
The innovations include improvements to the suspension. The conical springs for the subframe are no longer mounted on the top board but directly on the bottom, which allows a more stable vertical movement. In addition, a small, strong steel wire connects the subframe to a steel pin on the bottom, preventing the subframe from wobbling.

Precise speed control with the Thorens TD 1600 control unit
A powerful control unit takes care of the motor speed for an optimal listening experience.

Thorens TP 92 tone arm: unrivalled stability
The Thorens TD 1600 is equipped with a 9" (232.8 mm) Thorens TP 92 tone arm. The horizontal bearing of the TP 92 arm is a high precision ball bearing located under the tone arm tube at the same level as the diamond for better stability. The counterweight, decoupled by two rubber rings, is also at the same level. The Thorens TP 92 tone arm tube is made of high quality cold forged aluminium. During the design of the arm, a laser vibrometer was used to analyse the resonances of the tube, allowing Thorens engineers to target specific frequencies and thus ensure almost no unwanted vibrations.

The Thorens TD 1600 arm is ½" compatible, meaning it can accommodate any phono cell that is compatible with this mounting standard. The arm height (VTA) can be easily adjusted by loosening the tone arm locknut and then raising or lowering the tone arm. Anti-skating is provided by two ferrite magnets and can be adjusted with a set screw.

Elegance and performance combined
The Thorens TD 1600 has been specially designed to ensure that your favourite vinyl records are reproduced faithfully and accurately. With virtually no background noise and a stable, even platter rotation, it allows you to rediscover all the details and sound dynamics that characterise vinyl. With its exceptional sound quality, the Thorens TD 1600 will fit perfectly into audiophile systems and provide hours of quality listening.

CARACTERÍSTICAS
General
- Manual turntable with suspended subframe
- Belt drive
- Die-cast aluminium platter
- Turntable dimensions and weight: 30.5 cm (12") / 4.2 kg
- Speed: 33 1/3, 45 rpm
- Adjustable belt
- Electronically controlled synchronous AC motor
- Speed control: manual (front switch)
- Colour: Black

Pick-up arm
- Arm type: Thorens TP 92
- Arm length: 232.8 mm
- Overhang: 17.8 mm
- Elbow angle: 23.6
- Effective weight (11 g)
- Magnetic anti-skating

TAS 1600 sensor
- Moving coil sensor
- Diamond Line Bare Contact
- 1/2" mounting format
- Frequency response: 20 - 50,000 Hz
- PCOCC coil (Ohno Continuous Cast Copper)
- Aluminium body
- Brass connection pins
- Channel separation: 28 dB (1 kHz)
- Output channel balance: 0.5 dB (1 kHz)
- Output voltage: 0.4 mV (1 kHz, 5 cm/sec)
- Vertical tracking angle: 20 degrees
- Recommended contact force: 1.8 to 2.2 g (standard 2.0 g)
- Diamond size: 1.5 x 0.28 mil
- 0.28 mm boron cantilever
- Coil impedance: 12 Ohms (1 kHz)
- Coil inductance: 25 ?H (1 kHz)
- DC resistance: 12 Ohms
- Static compliance: 22 x 10 - 6 cm / dyne
- Dynamic compliance: 18 x 10 - 6 cm / dyne (100 Hz)
- Recommended load impedance: min 100 Ohms
- Cell weight: 8.2 g

Connections
- 1 stereo RCA
- XLR balanced output
- 1 ground socket
- Supplied accessories
- 1 power cable
- 1 rubber mat
- 1 mains transformer
- 1 acrylic protective cover

Logistic data
- Dimensions (WxHxD): 454 x 180 x 369 mm
- Weight: 10.9 kg
Ref. Euroguitar : 107022
Utilizamos cookies para mejorar tu accesibilidad, personalizar y analizar tu navegación. Si sigues navegando, consideramos que aceptas su uso. más información.
Sí, entiendo