Thorens TD 1500 NOIR

2075.00 €
Su tienda

36 rue Littré, Lille
del Lunes al sábado
10h-12h30 & 14h-19h


Teléfono : 03 20 88 85 85

Cerrar

Alerta disponibilidad

Pour recevoir un mail dès que ce produit sera disponible,
veuillez saisir votre adresse mail ci-dessous.

EN STOCK - expedición entre 5 y 7 días

Garantía 3 años (CG)

30 días para cambiar de opinion (CG)

Garantía de mejor precio

SOBRE EL PRODUCTO

The Thorens TD 1500 BLACK is a belt-driven turntable.

A wise choice for the discerning audiophile
The Thorens TD 1500 belt-driven turntable inherits elements and technologies from its predecessor, the Thorens TD 1600 turntable. This turntable is equipped with an Ortofon 2M Bronze cartridge mounted on its new Thorens TP 150 arm and the famous suspension chassis to ensure optimal playback conditions.

Optimal sound quality thanks to vibration damping
The Thorens TD 1500 chassis is designed to provide optimum vibration damping and prevent distortion caused by mechanical disturbances. Mounted on three springs and combined with a wooden plinth, it gives the turntable the classic, elegant look of a Thorens design.

An Ortofon 2M Bronze cell for faithful sound reproduction
The Ortofon 2M Bronze phono cell mounted on the removable cell holder of the Thorens TP 150 arm offers excellent tracking of the pickup and guarantees a reduction of the pinching effect. The large contact area of the diamond ensures better readability and less wear on the groove sides, as well as a very detailed reproduction of the sound spectrum. The Thorens TD 1500 is equipped with a pre-mounted Ortofon 2M Bronze moving magnet cartridge.

A quality platter for an exceptional listening experience
The platter of the Thorens TD 1500 is made of an aluminium frame combined with a thick rubber platter mat, ensuring excellent inertia while absorbing vibrations and guaranteeing a very good coupling of the record and the platter. The platter is driven by a thick rubber belt that connects the motor to the sub-platter. The platter is rotated by an electronically controlled motor, which makes it easy to change the playback speed via the speed selector.

A high-end turntable with quality connections
Finally, the Thorens TD 1500 turntable is equipped with an unbalanced RCA output and a balanced XLR output, offering optimal signal transmission with compatible electronics. This turntable is designed to be integrated into an audiophile system.

CARACTERÍSTICAS
General
- Manual turntable
- Suspended chassis
- Belt drive system
- Electronically controlled DC motor
- Aluminium platter
- Turntable size and weight: 30.5 cm (12") / 1.4 kg (4.2 lbs), Speed: 33 1/3, 45 rpm
- Anti-skating with counterweight mounted on ruby bearings
- Thorens TP 150 arm with 1/2" cell holder and SME ring
- Finish : Black

Connections
- Stereo RCA
- Ground connection
- Balanced XLR output

Ortofon 2M Bronze cell
- 1/2" mount - Fine Line - Moving magnet
- Output level at 1000 Hz, 5 cm/sec: 5 mV
- Channel balance at 1 kHz: 1 dB
- Channel separation: 26 dB (1 kHz) / 15 dB (15 kHz)
- Frequency range at -3 dB: 20 - 29,000 Hz
- Frequency response: 20 - 20,000 Hz +2 / -0 dB
- Readability at 315 Hz: 80 µm
- Dynamic lateral compliance: 22 µm/mN
- Diamond radius: r/R 8/40 µm
- Bearing force: 1.4-1.7 g (14-17 mN)
- Recommended seating force: 1.5 g (15 mN)
- Follow-up angle: 20°.
- Internal impedance: 1.2 kOhm
- Internal inductance: 630 mH
- Recommended load: 47 kOhm / 150-300 pF
- Cell mass: 7.2 g

Supplied accessories
- 1 RCA cable
- 1 rubber mat
- 1 mains transformer
- 1 acrylic protective cover

Logistic data
- Dimensions (W x H x D): 420 x 150 x 360 mm
- Weight: 7.9 kg
Ref. Euroguitar : 107020
Utilizamos cookies para mejorar tu accesibilidad, personalizar y analizar tu navegación. Si sigues navegando, consideramos que aceptas su uso. más información.
Sí, entiendo