Pmc 8-2-Sub L
The PMC 8-2 SUB is an extension of the PMC 8 2 studio monitors. Combined with the PMC 8 2 it extends its dynamic range, with a gain of 6dB compared to the main monitor alone.
The PMC 8-2 SUB is a subwoofer, similar to the PMC8 SUB and offering the same DSP engine for seamless integration with surround and immersive systems. The PMC8-2 SUB surpasses the specifications of its little brother by offering a higher maximum SPL down to 25 Hz.
With the same dimensions as the PMC 8-2 midfield monitor, the PMC 8-2 SUB is equipped with two eight-inch bass drivers, each powered by independent 400W Class-D amplifiers. The same configuration options as the PMC8 SUB are available, accessible from the rear of the speaker or via the browser-based SoundAlign™ software, accessible from a tablet, smartphone or LAN-connected computer.
The PMC8-2 SUB can be used as a standalone subwoofer for multichannel and immersive sound systems, or as an XBD subwoofer in combination with the PMC6-2 or PMC8-2, creating a system with impressive power and dynamic range. The subwoofer is available in left or right cabinet versions (PMC8-2 SUB-L or PMC8-2 SUB-R) to allow the placement of the bass drivers at the outer ends of a stereo configuration, matching the layout of the main monitors.
Frequency response: 25Hz - 500Hz (-3dB) (@1m free space, on axis) Max. SPL: continuous: 115dB @1m (quarter-space value calculated as +3dB over half-space measurement)
Unweighted input, 20-20kHz pink noise (IEC) with 12dB CF for 2 hours (AES2-1984 duration)
State-of-the-art Class-D amplifier: 2 x 400W Analog/AES3 digital input (16/24-bit, 18-192kHz sample rate)
Digital through output (AES3 24-bit, 96kHz)
Networked SoundAlign™ control interface for EQ and parameters in individual or group mode Sophisticated DSP loudspeaker protection, EQ, delay and phase options Dedicated XBD configuration mode.
Ref. Euroguitar : 114146
