Thorens TD 102 A NOYER

777.00 €
Su tienda

36 rue Littré, Lille
del Lunes al sábado
10h-12h30 & 14h-19h


Teléfono : 03 20 88 85 85

Cerrar

Alerta disponibilidad

Pour recevoir un mail dès que ce produit sera disponible,
veuillez saisir votre adresse mail ci-dessous.

EN STOCK - expedición entre 5 y 7 días

Garantía 3 años (CG)

30 días para cambiar de opinion (CG)

Garantía de mejor precio

SOBRE EL PRODUCTO

The Thorens TD 102 A Walnut is a fully automatic turntable with a walnut finish.

Enjoy effortless playback with this fully automatic turntable
Combining typical THORENS design, high sound quality and long life, the brand new TD 102 A fully automatic turntable ticks all the boxes to satisfy vinyl fans, as well as fans of the world-renowned German brand. Its careful design and modern mechanism guarantee quality and durability. Also comes with the AT VM95E cartridge for a totally plug and play experience.

The TD 102 A, a combination of design and simplicity.
With this new product, THORENS has perfectly combined the timeless aesthetics of the original vinyl turntables with the automation of modern turntables. The turntable has a wooden frame and a lacquered finish and is available in "gloss black" and "gloss walnut". But it's also all the practical details that can be highlighted: shock-absorbing feet, a fully automatic system and an integrated switchable phono pre-amp for easy and complete connection to all modern audio systems. In addition to all these features, the TD 102 A offers a perfect and intact sound quality, without vibrations, thanks to the absorption of a rubber plate cover and its indirect belt drive.

The strength of an Audio Technica AT VM95E
This turntable is equipped with a TP 72 tone arm and a pre-mounted Audio-Technica AT VM95E cartridge. The newly developed carbon tone arm combines lightness and strength, and also helps to limit vibrations. The AT VM95E phono cell is an asset of the turntable, thanks to its technicality and its performances: equipped with a double magnet MM type generator (the coils adopt a para-toroidal shape and are made of high purity OFC copper (99.99997%)) and with a VM technology (based on the use of two magnets placed in a V shape (Audio-Technica Vector Aligned technology), the magnetic performances of the cell are assured. Finally, the cell offers a reduction in sound distortion thanks to an isolation plate located between the coils, and also guarantees linear sound reproduction from 20 Hz to 22 kHz.

Features
- Fully automatic
- Dust cover
- Integrated switchable phono pre-amp
- VM95E AT cell mounted and adjusted
- TP 72 arm Single efficient

CARACTERÍSTICAS
General
- Automatic operation
- Belt drive (flat belt around the sub-platter)
- Built-in RIAA phono pre-amp (switchable)
- DC motor
- Speed: 33-1/3 rpm, 45 rpm with electronic control
- Signal-to-noise ratio: 60 dB
- Wooden chassis with shock absorbing feet
- Finish: Walnut high gloss

Table top
- Die-cast aluminium
- Platter diameter: 12" (300 mm)
- Rubber platter cover ( pater matt)

TP 72 tone arm
- Design : Carbon
- Arm type: Straight
- Effective length: 214.5 mm
- Overhang : 19,5 mm
- Magnetic anti-skating

Audio-Technica AT VM95E cartridge
- Elliptical Diamond (0.3 x 0.7 mil)
- Generator type: Moving magnet (VM)
- Para-toroidal copper coils
- Chassis: Low resonance polymer material
- Aluminium conical cantilever
- Frequency response: 20 Hz - 22 kHz
- Channel separation: 20 dB (1 kHz)
- Channel balancing: 2 dB (1 kHz)
- Output voltage: 4 mV (1 kHz, 5 cm/sec)
- Vertical reading angle: 23
- Grip force: 1.8 - 2.2 grams
- Recommended holding force: 2 grams
- Static compliance: 17 x 10 -6 cm/dyne
- Dynamic compliance: 7 x 10 -6 cm/dynVMe (100 Hz)
- Coil impedance: 3.3 kOhms (1 kHz)
- Recommended load impedance: 47 kOhms
- Recommended load capacitance: 100 to 200 pF
- Coil inductance: 550 mH (1 kHz)
- DC resistance: 485 Ω
- Cable used for the coil: T.P. Copper
- Diamond Attachment: Bounded Round Shank

Connections
- 1 stereo RCA
- 1 ground socket

Supplied Accessories
- 12V DC external power supply
- Acrylic protective cover
- RCA Phono cable
- Rubber tray mat

Logistic data
- Dimensions (WxHxD): 420 x 138.6 x 355 mm
- Weight: 4.8 kg
Ref. Euroguitar : 107048
Utilizamos cookies para mejorar tu accesibilidad, personalizar y analizar tu navegación. Si sigues navegando, consideramos que aceptas su uso. más información.
Sí, entiendo