Audio technica AT-XP5
SOBRE EL PRODUCTO
The AT-XP5 is specially designed for the needs of DJs.
This cartridge features a highly-rigid polyphenylene sulfide (PPS) / glass fiber body and a tracking force of 2 to 4 grams. It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction. Plus, the cartridge is specifically designed to provide maximum visibility of the stylus tip.
CARACTERÍSTICAS
- Frequency response 20-18 000 Hz
- Channel separation 20 (dB at 1 kHz)
- 2.0-4.0g vertical tracking force (3.0g standard)
- Charging impedance recommended 47,000 ohms
- Output 5.5 mV (1 kHz, 5 cm / sec.)
- Channel balance 2.0 dB (1 kHz)
- Stylus shape 0.3 x 0.7 mil elliptical
- ABS cantilever reinforced carbon fiber
- Half inch thumb
- Replacement stylus ATN-XP5
- Coil impedance: 6.7 k ohms (1 kHz)
- DC resistance: 990 ohms
- Recommended load capacity: 100 to 200 pF
- Coil inductance: 1.0 H (1 kHz)
- Vertical tracking angle: 20 °
- Dimensions: 17.2 mm (0.68 ") H × 17.8 mm (0.67") W × 28.3 mm (1.20 ") D
- Weight: 6.2 g (0.22 oz)
- Ref. Euroguitar : 79690
- Channel separation 20 (dB at 1 kHz)
- 2.0-4.0g vertical tracking force (3.0g standard)
- Charging impedance recommended 47,000 ohms
- Output 5.5 mV (1 kHz, 5 cm / sec.)
- Channel balance 2.0 dB (1 kHz)
- Stylus shape 0.3 x 0.7 mil elliptical
- ABS cantilever reinforced carbon fiber
- Half inch thumb
- Replacement stylus ATN-XP5
- Coil impedance: 6.7 k ohms (1 kHz)
- DC resistance: 990 ohms
- Recommended load capacity: 100 to 200 pF
- Coil inductance: 1.0 H (1 kHz)
- Vertical tracking angle: 20 °
- Dimensions: 17.2 mm (0.68 ") H × 17.8 mm (0.67") W × 28.3 mm (1.20 ") D
- Weight: 6.2 g (0.22 oz)
- Ref. Euroguitar : 79690
