Algam lighting SPLITTER-DMX4

Four DMX lines from a single input
The SPLITTER-DMX4 duplicates the signal from the lighting console into four separate outputs, each initiating a new DMX line capable of supporting up to 32 devices. This allows fixtures to be organized by zone, truss, or device type, resulting in shorter cable runs and a more clearly structured installation. Unused outputs do not require termination.

A reliable system for any installation
Each output is optically isolated and equipped with its own dedicated amplifier. An issue on one line will not affect the other outputs or the console, and the signal is regenerated to maintain full integrity. With a dedicated signal LED for each output, plus an input DMX LED and a power LED, the entire distribution status can be monitored at a glance.

A scalable solution
A parallel "Thru" output allows for the daisy-chaining of multiple splitters, while a front-panel 120 Ω termination switch eliminates the need for an external termination plug. The unit features an integrated power supply with a PowerCon connector and an on/off switch—no external power brick required. Housed in a 247 x 116 x 39 mm metal chassis weighing 891 g, and equipped with locking 3-pin XLR connectors, an included mounting bracket (clamp optional), and an attachment point for a safety cable, the SPLITTER-DMX4 is suitable for use on trusses, lighting structures, or in control booths—ideal for stages, performance venues, rental companies, educational institutions, and permanent installations.