Qsc RMX 1450A
SOBRE EL PRODUCTO
Etapa final de potencia estéreo QSC Rmx 1450a.
CARACTERÍSTICAS
Power Amp
Stereo Mode (EIA: both channels driven)
8 ohms EIA 1 kHz 0.1% THD 280W
4 ohms EIA 1 kHz 0.1% THD 450W
2 ohms EIA 1 kHz 1% THD 700W
Bridge Mono Mode
8 ohms EIA 1 kHz 0.1% THD 900W
4 ohms EIA 1 kHz 1% THD 1400W
Signal to Noise (20 Hz-20 kHz) 100 dB
Distortion (SMPTE-IM) Less than 0.01%
Input Sensitivity @ 8 ohms 1.15v (+3.4 dBu)
Voltage Gain 40x (32 dB)
Output Circuitry AB
Current Consumption (1/8 power pink noise at 4 ohms @ 120VAC,
both channels driven; multiply current by .5 for 230V units.) 7A
Weight (Net) 40lb. (18.2 kg)
Compact size - up to 2400 watts in 2 rack spaces
Professional quality performance - incorporates road-proven QSC designs
High-current toroidal transformers for greater two-ohm power and low noise
Independent user-defeatable clip limiters reduce distortion
Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
Balanced 1/4" (6.3mm) TRS, XLR and barrier strip inputs
Binding post and Neutrik Speakon outputs
Front mounted gain controls for easy access
Signal and Clip LED indicators to monitor performance
Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
3-year warranty plus optional 3-year extended service contract
RMX amplifiers deliver true studio-quality sound. A full complementary output circuit using the highest-grade linear output devices delivers ultra-low distortion (<0.05% THD) and a ruler-flat frequency response. SMT (Surface Mount Technology) triples small-signal component density, enabling us to pack up to 2400 watts of power in a chassis only 2 rack spaces and less than 16" deep. And unlike other designs, RMX output devices are direct-mounted to the heat sink for optimum thermal coupling and cooling.
Ref. Euroguitar : 7780
Stereo Mode (EIA: both channels driven)
8 ohms EIA 1 kHz 0.1% THD 280W
4 ohms EIA 1 kHz 0.1% THD 450W
2 ohms EIA 1 kHz 1% THD 700W
Bridge Mono Mode
8 ohms EIA 1 kHz 0.1% THD 900W
4 ohms EIA 1 kHz 1% THD 1400W
Signal to Noise (20 Hz-20 kHz) 100 dB
Distortion (SMPTE-IM) Less than 0.01%
Input Sensitivity @ 8 ohms 1.15v (+3.4 dBu)
Voltage Gain 40x (32 dB)
Output Circuitry AB
Current Consumption (1/8 power pink noise at 4 ohms @ 120VAC,
both channels driven; multiply current by .5 for 230V units.) 7A
Weight (Net) 40lb. (18.2 kg)
Compact size - up to 2400 watts in 2 rack spaces
Professional quality performance - incorporates road-proven QSC designs
High-current toroidal transformers for greater two-ohm power and low noise
Independent user-defeatable clip limiters reduce distortion
Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
Balanced 1/4" (6.3mm) TRS, XLR and barrier strip inputs
Binding post and Neutrik Speakon outputs
Front mounted gain controls for easy access
Signal and Clip LED indicators to monitor performance
Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
3-year warranty plus optional 3-year extended service contract
RMX amplifiers deliver true studio-quality sound. A full complementary output circuit using the highest-grade linear output devices delivers ultra-low distortion (<0.05% THD) and a ruler-flat frequency response. SMT (Surface Mount Technology) triples small-signal component density, enabling us to pack up to 2400 watts of power in a chassis only 2 rack spaces and less than 16" deep. And unlike other designs, RMX output devices are direct-mounted to the heat sink for optimum thermal coupling and cooling.
Ref. Euroguitar : 7780
