Ampeg SVT-4PRO Head
SOBRE EL PRODUCTO
An up-to-date serie, combining modern technology with Ampeg classic sound.
CARACTERÍSTICAS
Bass amp head
Dimensions: 19 x 5.6 x 15.5
Weight: 42 Pounds
Preamp (Tube or Solid State): T (3 x 12AX7)
Driver Tubes: n/a
Power Amp (Tube or MOSFET): MF
RMS Power Output (8 Ohms): 300x2/900 (mono-bridged @ 8 Ohms)
RMS Power Output (4 Ohms): 490x2/1200 (mono-bridged @ 4 Ohms)
RMS Power Output (2 Ohms): 600x2
Tone Controls: 3 band
Mid Tone Control: 5 pos
Graphic EQ: 9 band
Ultra Low/High Boosts: Yes
Balanced Line Out: Yes x 2 (transformer)
Effects Loop: Yes x 2
Preamp Out/Power Amp In: Yes x 2
Other Features
Input Peak LED
Dual 1/4' Inputs
-15 dB Pad
Variable 0 - 7:1 Compressor
Bright Switch
Nine Band Graphic EQ
Defeatable Optocoupler Limiters
Internal 24 dB/Octave Crossover
Linkwitz-Riley State Variable Filters
50 - 1KHz Variable Crossover Point
High/Low Balance Control
Tuner Out Jack
Mute Function
1/4' Biamp High and Low Outputs
AC Convenience Outlet
15 Amp Circuit Breaker
The sound is in your head. You've played countless instruments in search of the ultimate soul mate. Now you need an amp that will speak your sound to the audience. That's where the Pro Series heads live.
Pro Series heads feature single or multi-tube preamps, five position mid frequency selection, and Neutrik Speak-On(r) connectors that lock and provide better conductivity. A Mute button lets you change instruments in the middle of a set without the annoying 'pop,' and a Tuner Out jack that stays active even with Mute button on.
Pro Series heads are built for the long haul. The units remain cool with variable speed fans that only turn as the temperature dictates. DC supplied filaments ensure noise-free tube performance. And the 1/8' thick extruded aluminum front panels not only allow safe racking, the contoured fronts have an awesome look.
Ref. Euroguitar : 23090
Dimensions: 19 x 5.6 x 15.5
Weight: 42 Pounds
Preamp (Tube or Solid State): T (3 x 12AX7)
Driver Tubes: n/a
Power Amp (Tube or MOSFET): MF
RMS Power Output (8 Ohms): 300x2/900 (mono-bridged @ 8 Ohms)
RMS Power Output (4 Ohms): 490x2/1200 (mono-bridged @ 4 Ohms)
RMS Power Output (2 Ohms): 600x2
Tone Controls: 3 band
Mid Tone Control: 5 pos
Graphic EQ: 9 band
Ultra Low/High Boosts: Yes
Balanced Line Out: Yes x 2 (transformer)
Effects Loop: Yes x 2
Preamp Out/Power Amp In: Yes x 2
Other Features
Input Peak LED
Dual 1/4' Inputs
-15 dB Pad
Variable 0 - 7:1 Compressor
Bright Switch
Nine Band Graphic EQ
Defeatable Optocoupler Limiters
Internal 24 dB/Octave Crossover
Linkwitz-Riley State Variable Filters
50 - 1KHz Variable Crossover Point
High/Low Balance Control
Tuner Out Jack
Mute Function
1/4' Biamp High and Low Outputs
AC Convenience Outlet
15 Amp Circuit Breaker
The sound is in your head. You've played countless instruments in search of the ultimate soul mate. Now you need an amp that will speak your sound to the audience. That's where the Pro Series heads live.
Pro Series heads feature single or multi-tube preamps, five position mid frequency selection, and Neutrik Speak-On(r) connectors that lock and provide better conductivity. A Mute button lets you change instruments in the middle of a set without the annoying 'pop,' and a Tuner Out jack that stays active even with Mute button on.
Pro Series heads are built for the long haul. The units remain cool with variable speed fans that only turn as the temperature dictates. DC supplied filaments ensure noise-free tube performance. And the 1/8' thick extruded aluminum front panels not only allow safe racking, the contoured fronts have an awesome look.
Ref. Euroguitar : 23090
TAMBIÉN LE INTERESARÁ
