Meris 440 Mic Preamp 500 Series
SOBRE EL PRODUCTO
Featuring state of the art handcrafted algorithms, the MERIS 440 Mic Preamp 500 Series effect processor offers studio-grade mic pre for recording acoustic or electric guitar, but also performs on varying sources like vocals, strings, and percussion.
440/500 Mic Preamp gives you classic american console sound, thanks to the legendary Cinemag input and output transformers and high performance hybrid-discrete opamps.
CARACTERÍSTICAS
- MERIS 440 Mic Preamp 500 Series
- SKU 440-DLR
- Studio-grade effects processor (rackable), ultimate mic pre for recording electric and acoustic guitar
- Compatible with voice, strings, percussions
- Made in USA
- 2017
- Legendary Cinemag Input and Output transformers for classic American mic pre tone
- Hybrid-Discrete opamps receiving and driving each respective transformer section
Pedal friendly post effects loop. Interface with pedals at levels that won’t clip
- High Pass Filter selectable between 80Hz and 200Hz
- Custom 7kHz or 4kHz High Shelf filter optimized for achieving a finished tone when recording guitar
- 20dB Pad, Phase Reverse and Phantom Power toggles
- Premium components throughout the all analog signal path
- Up to 60dB of gain at the input section
Output trim -27dB to +12dB (occurs pre-output transformer to preserve output transformer secondary impedance)
- 12dB / octave High-Pass : 80Hz or 200Hz corner frequency
- High-Shelf boost : + 3dB at 4kHz or 7kHz corner frequency
- 20Hz to 20kHz flat frequency response (+/-.3 dB) with all filters disengaged
- -130dBu EIN (A-weighted)
- 1Meg Ohm input impedance at Return/D.I. input
- Manual : https://www.meris.us/wp-content/uploads/2014/02/440UserManual.pdf
- Ref. Euroguitar : 83328
- SKU 440-DLR
- Studio-grade effects processor (rackable), ultimate mic pre for recording electric and acoustic guitar
- Compatible with voice, strings, percussions
- Made in USA
- 2017
- Legendary Cinemag Input and Output transformers for classic American mic pre tone
- Hybrid-Discrete opamps receiving and driving each respective transformer section
Pedal friendly post effects loop. Interface with pedals at levels that won’t clip
- High Pass Filter selectable between 80Hz and 200Hz
- Custom 7kHz or 4kHz High Shelf filter optimized for achieving a finished tone when recording guitar
- 20dB Pad, Phase Reverse and Phantom Power toggles
- Premium components throughout the all analog signal path
- Up to 60dB of gain at the input section
Output trim -27dB to +12dB (occurs pre-output transformer to preserve output transformer secondary impedance)
- 12dB / octave High-Pass : 80Hz or 200Hz corner frequency
- High-Shelf boost : + 3dB at 4kHz or 7kHz corner frequency
- 20Hz to 20kHz flat frequency response (+/-.3 dB) with all filters disengaged
- -130dBu EIN (A-weighted)
- 1Meg Ohm input impedance at Return/D.I. input
- Manual : https://www.meris.us/wp-content/uploads/2014/02/440UserManual.pdf
- Ref. Euroguitar : 83328
TAMBIÉN LE INTERESARÁ
